Maintenance and cleaning of LED lights！

2024-03-20

Unreasonable use, maintenance and cleaning methods will also greatly reduce the advantages of LED lights. Therefore, for LED lights, we must not only be able to buy them, but also use them and maintain them!

First, after buying an LED light, you should carefully read the label of the LED light and read the installation and operating instructions, and then install and use the LED light according to the instructions.

Second, replace light in a timely manner according to the light source parameters provided by the sign. If you find that the ends of tight are red, the light is black or have a black shadow, or the light fails to light up, you should replace tight in time to prevent the occurrence of ballast. Unsafe phenomena such as device burnout;

Third, during cleaning and maintenance, you should be careful not to change the structure of the LED light, and do not replace the parts of the LED light casually. After cleaning and maintenance, the LED light should be installed as it is, and do not miss or install the wrong parts of the LED light.

Fourth, LED lights must be maintained during use to extend their service life. The light tubes in the room should be wiped frequently with a dry cloth, and care should be taken to prevent moisture intrusion to avoid corrosion damage or leakage and short circuits over time.

Fifth, try not to switch on and off frequently when using LED lights, because when LED lights are frequently started, the current passing through the filament is greater than the current during normal operation, causing the temperature of the filament to rise sharply and accelerate sublimation, thus greatly reducing its use. life, so try to minimize the switching of LED lights.